Chassis:Â SuperChassis 825TQ-R740LPB
CPU: 2x Intel Xeon E5-2640 V4
RAM: Geen, 32 GB mogelijk voor meerprijs van 250 euro (2x 16 GB ECC DDR4 RDIMM)
Motherboard: X10DRH-iLN4
RAID: Microsemi Adaptec ASR8805 (Inclusief AFM-700 BBU module)
PSU: Geen, mogelijk tegen meerprijs 100 euro
Geen beschadigingen, alles werkt 100%, getest.
---
MBD-X10DRH-iLN4
Form Factor: E-ATX
Dimensions: 12" x 13" (30.5cm x 33.2cm)
CPU
Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache
Up to 22 Cores / Up to 55MB Cache
System Bus
QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
Note Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory
Memory Capacity
16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage
1.2 V
Error Detection
Corrects single-bit errors
On-Board Devices
Chipset
Intel® C612 chipset
AHCI SATA
SATA3 (6Gbps); RAID 0, 1, 5, 10
SCU SATA
SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC
Network Controllers
Intel® i350 Quad Gigabit Ethernet LAN
Virtual Machine Device Queues reduce I/O overhead
Video
ASPEED AST2400 BMC
Input / Output
SATA
10x SATA3 (6Gbps) ports
LAN
4x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
4x USB 2.0 ports (4 via headers)
Video
1x VGA Connector
Serial Port / Header
1x Fast UART 16550 serial
2x COM Ports (1 rear, 1 header)
DOM
2x SuperDOM (Disk on Module) ports
TPM
1x TPM Header
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
Plug and Play (PnP)
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software
Intel® Node Manager 3.0
IPMI 2.0
NMI
SPM
SSM
SUM
SuperDoctor® III
SuperDoctor® 5
Watch Dog
Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
6 Phase-switching voltage regulator
FAN
8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features
Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS
Operating Environment
Operating Temperature Range
10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
-40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
5% - 95% (non-condensing)
---
CPU:
# of Cores: 10
# of Threads: 20
Processor Base Frequency: 2.40 GHz
Max Turbo Frequency: 3.40 GHz
Cache: 25 MB SmartCache
Bus Speed: 8 GT/s QPI
# of QPI Links: 2
TDP: 90 W
Sockets Supported: FCLGA2011-3
Max CPU Configuration: 2
Max Memory Size (dependent on memory type): 1.54 TB
Memory Types: DDR4 1600/1866/2133
Max # of Memory Channels: 4
Max Memory Bandwidth: 68.3 GB/s
Physical Address Extensions: 46-bit
ECC Memory Supported: Yes
---
Key RAID Features
Flexible Configuration: HBA Mode & Auto Volume Mode for automatic deployment
Optimized Disk Utilization (Multiple Arrays per disk)
Supports up to 256 SAS or SATA devices using SAS expanders
Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, 60
Support for native 4K sector SAS and SATA devices in addition to 512byte sector devices
Hybrid RAID 1 & 10
Quick initialization
Online Capacity Expansion
Performance modes: Dynamic, OLTP & Big Block ByPass
Copyback Hot Spare
Dynamic caching algorithm
Native Command Queuing (NCQ)
Background initialization
Hot-plug drive support
RAID Level Migration
Hot spares - global, dedicated, and pooled
Automatic/manual rebuild of hot spares
SES and SAF-TE enclosure management
Configurable stripe size
SMART support
Multiple arrays per disk drive
Dynamic sector repair
Staggered drive spin-up
Bootable array support
Support for Tape Devices, Autoloaders
MSI-X support for all device driver for all supported Operating Systems
Secure boot support for the uEFI host bios
USB image available
Management Utilities
Software
Adaptec maxView Storage Manager
Web based GUI Management Utility
OS Support: Windows, Linux, Solaris VMware
Remote configuration, monitoring & notification
Remote firmware updates
SMI-S Support
SMTP
ARCCONF
Command Line Interface
SMI-S support for VMware
Adaptec uEFI BIOS Configuration Utility
HII based confi guration utility
Flashable BIOS support
Data Transfer Rate
12Gb/s per port
Bus System Interface
8-lane PCIe Gen3
Form Factor
MD2 Low Profile
Cache Memory
1024MB
Connector Configuration
Two internal mini SAS HD (SFF-8643)
Package Contents
Adaptec RAID 8805 adapter
Additional low profile vented bracket
Physical Size
2.535"H x 6.6"L (64mm x 167mm)
Operating Temperature
0°C to 55°C* (with 200 LFM airflow)
Note: This Adaptec card contains a powerful RAID processor which requires adequate airflow to operate reliably. Please install this card only into server or PC chassis with recommended airflow (200 LFM). * Ambient temperature measured 1" away from the RAID processor
Operating Voltage
0.1A @ 3.3VDC 1.2A @ 12VDC
Regulatory Certification
CE, FCC, UL, C-tick, VCCI, KCC, CNS
Environmental Compliance
RoHS
Mean Time Before Failure (MTBF)
>700,000 hours at 40Â
Locatie: Noord-Holland - Amsterdam
Toegevoegd op 1 dag geleden en vervalt op 20 December
Advertentie id: 790728
[ ]
277 bezoeken
