1 x Dell PowerVault MD1200 12-Bay SAS Storage Array Chassis
12 x SAS 3.5" caddies
2 x Redundant MD12 Series 6Gb/s SAS Controllers
2 x 600W Power Supplies
The MD1200 can be used an expansion array for the MD3200/MD3200i, or can be connected directly to a server using a PERC H800/H810 controller
Dell™ PowerVault™ MD1200 direct-attached storage enclosure offers versatility and high-capacity storage for mainstream applications with optimal performance in sequential (streaming) applications.
Seamless server and primary storage expansion for 6Gb/s SAS environments Supports mainstream and capacity-intensive applications such as email, backup to disk and video streaming Versatility for investment protection and data tiering Connectivity
Support for the following configurations:
Unified mode (single path) for daisy chaining of up to 8 enclosures per PERC H800 (4 enclosures per port, single path)
Unified mode (redundant path) for daisy chaining up to 4 enclosures per PERC H800 (4 enclosures connected to both ports via redundant path cabling)
Split mode with dual Enclosure Management
Modules providing direct connectivity to drives 0 through 5 and a separate connectivity to drives 6 through 11.
Management
2 Enclosure Management Modules(EMM) provide redundant enclosure management capability Back-Panel Connectors SAS connectors (per EMM)
1 SAS (SFF 8088) "IN" connector for connection to the host
1 SAS (SFF 8088) "OUT" connector for expansion to an additional enclosure
Serial connector (per EMM)
1 6-pin UART mini-DIN connector (for factory use only)
LED Indicators
Front panel
1 two-color LED indicator for system status
2 single-color LED indicators for power and split mode
Drive carrier
1 single-color activity LED
1 two-color LED status indicator per drive
EMM
3 two-color LED status indicators: one each for the two EMM SAS ports and one for the EMM status
1 single-color Unit Identification LED for each EMM
Power supply/cooling fan module
3 LED status indicators for power supply status, power supply/fan fault and AC status
Power
Two fully redundant power supplies; supports DC power
Wattage: AC - 600 W; DC – 700 W
Heat dissipation: AC - 2047BTU/hr; DC - 2388 BTU/hr
Voltage: 100-240 VAC, auto sensing; 48V DC Frequency: 50/60 Hz
Amperage: 8.6 A at 100 V, 4.3 A at 240 V
Available Drive Power (per slot)
Supported drive power consumption (continuous):
up to 1.16 A at +5V
up to 1.6 A +12V
Chassis
Height
8.7cm (3.43 inches)
Width
48.2cm (18.98 inches)
Depth
59.4 (23.39 inches)
Weight
28.39 kg (62.6 lb) (maximum configuration) 8.84 kg (19.5 lb) (empty)
Environmental Operating Conditions Temperature:
Operating: 10° to 35°C (50° to 95°F) with maximum temp gradation of 10°C per hour Storage: -40° to 65°C (-40° to 149°F) with temp gradation of 20°C per hour Supports Fresh Air cooling, up to 35 degrees Celsius
Relative humidity:
Operating: 8% to 85% (non-condensing) with maximum humidity gradation of 10% per hour Storage: 5% to 95% (non-condensing)
Altitude:
Operating: -16 to 3048 m (-50 to 10,000 ft)
Storage: -16 to 10,600 m (-50 to 35,000 ft)
Operating System
Refer to RAID Card for details on supported
Operating:
Locatie: Noord-Holland - Amsterdam
Toegevoegd op 5 dagen geleden en vervalt op 10 October
Advertentie id: 1148253
[ ]
96 bezoeken
